Products

Introduction

We combine our experience in radar technology with our knowledge in microwave engineering to create innovative measurement solutions for automotive radar sensors and radar covers (radomes). All key components are developed and produced in-house or in close cooperation with our partners to meet highest quality requirements.

Radome Measurement System

With the Radome Measurement Systems (RMS) perisens offers an solution for every stage of the entire product life cycle of automotive radomes:

From material development and radar cover design to series production and quality control.

Our RMS systems are worldwide in use in more than 100 installations by leading OEM, radar sensor supplier, exterior part supplier and plastic, paint and pigment manufacturer since 2019.

The RMS system is available in two versions RMS-D-77/79G for R&D and quality control and RMS-C-77/79G for production and quality control.

RMS-D-77/79G

(Radome Measurement System – Desktop)

The ideal solution for testing of automotive radar covers (radomes) & characterization of materials in Research & Development and Quality Control.

Key Features

  • Measurement of
    • transmission in amplitude and phase
    • imaging reflection (optional)
    • permittivity and loss tangent of plastics and coatings (primers, base & clear coatings)
  • Future proof: Both automotive radar bands (77/79G)
  • Easy to handle: Measurement with a single button press
  • Includes simulation software which allows to evaluate and optimize layered radomes
  • Measurement of samples with small size
  • Fast update time allows real time measurement
  • Highest accuracy in market (better than +/-0.1 dB | +/-1 deg for transmission)
  • Comparability with measurements using VNA (Vector Network Analyzer) and RMS-C
  • Positioning system for scanning measurements (optional)
  • Cost effective solution compared to VNA systems
  • Proven technology: Used worldwide by leading paint, pigment and polymer manufacturers, exterior part suppliers, sensor producers and OEMs since 2019

RMS-C-77/79G

(Radome Measurement System – Clamp)

The cost-effective and reliable solution for testing of automotive radar covers (radomes) in Production (In-line and end-of-line testing EoL) and Quality Control.

Key features

  • Measurement of
    • transmission in amplitude and phase
    • reflection (software option)
  • Future proof: Both automotive radar bands (77/79G)
  • Robust design enhanced for 24/7 high-precision testing (housing milled from a single block of aluminium)
  • Short measurement time allows test within a few seconds
  • Flexible pointwise measurement: Allows to follow the shape of the part in a robot-based setup (e.g. to measure vertical in every point of a bumper)
  • Configurable setup: Available with different arm lengths and vertical or horizontal (optional) polarization
  • Flexible integration in production: Prepared for robot-based process; remote control by Ethernet and powered with 24 VDC
  • Highest accuracy in market (better than +/-0.1 dB | +/-1 deg for transmission) and transparent measurement procedure
  • Comparability with measurements using VNA (Vector Network Analyzer) and RMS-D
  • Proven technology: Used worldwide in more than 100 installations for leading automotive OEMs since 2020

Radar Target Simulator

The RTS (Radar Target Simulator) from perisens is an efficient tool to test automotive radar sensors in R&D and production. Our Radar Target Simulators are in operation in several installations worldwide since 2014 and have been continuously further developed. The RTS are based on analog signal processing and therefore provide absolutely realistic target behavior. The target simulators work independently of the used radar principle (FMCW, Chirp Sequence FMCW, FSK, Pseudo Noise, …) and are able to simulate one or more targets simultaneously. The received radar signal is down-converted from the radar frequency  to an intermediate frequency (IF), where the target attributes are added (for one or more targets). Afterwards, the IF frequency is up-converted back to the radar frequency and sent back to the radar sensor. Through the modular structure of our target simulators we meet your individual needs – flexibly and cost sensitive.

The key features are:

  • all automotive radar bands: 24GHz or 76/79GHz
  • instantaneous bandwidth: 200MHz (24G) or 5,000MHz (76/79G)
  • simulation of target properties in
    • Range / Distance
    • RCS / Attenuation
    • Velocity / Doppler
  • resolution (separability) analysis in range (5 mm steps) and velocity domain with offset target
  • analog technology: Transparent behavior – suitable for all radar modulation types
  • moving target simulation: e.g. evaluation of emergency breaking systems
  • remote control via Ethernet with LXI
  • calibrated IF output/input: Signal analysis & generation at intermediate frequency
  • Radar Signal Analyzer (RSA) with 2 GHz bandwidth for FMCW analysis (optional)

Make our experience in radar sensor technology since 2009 work for you and get in touch with us!

Frequency Converter

perisens provides high-quality Frequency Converters (FC) covering the automotive radar bands at 24GHz and 76/77GHz. Our up  and down converters allow fully calibrated signal analysis and signal generation at millimeter wavelengths using cost effective measurement devices at low GHz frequencies. The systems are available as seperate up and down converters or as combined up- and down converter in one device.

The key features are:

  • all automotive radar bands: 24GHz or 76/79GHz
  • bandwidth: 200MHz (24G) or 5,000MHz (76/79G)
  • Build-in local oscillator
  • fully calibrated (IF2RF and RF2IF)

Make our experience in microwave engineering since 2009 work for you and get in touch with us!

Back to top